Sunday, August 5, 2012

This Frenzy Massive's sorta tall...


I resumed building today, completed the following, and everything's curing in my warm garage:

Frenzy Massive:
  • Designed the EBay sled template in Illustrator, traced and cut that from 1/16" G10, JBWelded brass tubing on the bottom, taped the tubes in place, and threaded into the cavity to cure in line with the 5/32" all-threads.
  • Scuffed up the motor tube, marked the positions of the centering rings, and epoxied all three in place.  I should note that I'm not leaving the aft-most ring free as recommended in the instructions.  I'm confident that my fin mounting methods, in combination with expanding foam, will withstand even a CTI N10000.
Extreme DarkStar [Heavy]:
  • Numbered, sanded, and fit fins into booster slots
  • Inspired by Darrel Kelley's work I cut a comb-like pattern into the fin roots to improve adhesion to the motor tube:
  • Scuffed up all fin tabs
  • Epoxied first pair of fins in place (make that two pair)

Sunday, July 29, 2012

Frenzy Massive progress

This weekend I took several more steps toward my N1975 flight at Black Rock dry lake in September.  The Madcow Frenzy Massive's coming together quite nicely:

1) Attached AeroPack motor retainer to aft centering ring
2) Completed nosecone assembly
3) Complete Ebay assembly (but still need to build/configure the sled)

I still need to complete the motor mount and fin assembly but construction could wrap up in the next week or so if I continue at this pace.  Those damned Olympics keep drawing me in, however!

Monday, June 25, 2012

Plaster City May '12 launch report

I've had this Pro54 6GXL L935 Imax reload laying about doing nothing for some time now. I elected to put it to work and then retire my trusty Loc 7.5" V2 after this fine flight:
That was the first and last onboard V2 footage I'll generate with that particular projectile of German design.  Here's the liftoff shot:

I really appreciate the initial cyan-ish flame tint near the nozzle. There in the lower left you'll also notice Frank Hermes' new Rocket Electronics RocKontroller 1 (model D).  I highly recommend this handy product as you'll never again need to haul launch leads out to the pad! That I set an altitude record of 7,472' for this rocket on its final journey simply iced the cake (Raven 2 data: graph, tabular).

And with that I bid thee auf wiedersehen, trusty old friend.  I now plan to procure a Polecat Aerospace 7.5" V2 with a 75mm mount to access some extra umph.

Sunday, June 17, 2012

Plaster City April '12 launch report

I'll cease adding 'belated' as you're more than smart enough to deduce perpetual tardiness on my part.  In general I lag on these updates because I want the video to appear polished so that's the bottleneck.  In the future, if I have time, I'll add accouterment. Otherwise I'll prioritize swift posting over video rigor.
     Secondly... 10 months after being promoted to TAP I signed off on my first L3!!  Paul Breed successfully attained L3 cert on his first try after a beautiful Madcow DX3 Massive flight.  Congratulations, Paul!


After that month's launch I had posted a private draft of my flight for a few folks.  I just made that public so here's the unabridged, unedited onboard video from my largest Skidmark flight to date: the Pro75 5G CTI 4828L1410 (available in glorious 720p when viewed on YouTube):

My buddy Megan attended her first launch that day and did an amazing job of shooting photos thus freeing me up to prep instead.  Her shutter timing astounds me and often she would click off a single frame, nailing it first try, and not even needing the 10 frames per second available to her:

I've been using my new 3DConnexion Space Navigator mouse to peruse GPS flight data and Google Earth in general.  They're only $91 on Amazon so you should immediately ditch this silly blog and procure one post haste!

Elevation and pitch always seemed coupled in Google Earth but the 3D mouse made quick work of separating them as seen in this M840 vs. L1410 comparison:

The two altimeters averaged 11,903' AGL (barometric) and the Beeline GPS peaked at 12,383' so I'm gonna call it 12,000+.

Raven data - graph, tabular
ARTS2 data - graph, tabular, motor performance (5043L1424), CD analysis

Again, thanks to Megan's help, I was able to get to a second flight in that day!  Darrell had built an AT J1799 (a reworked J1999) Warp9 for me the month before but I was unable to get my aging BlackSky AltACC2C working reliably in my otherwise stalwart Loc 7.5" V2 and had to scratch the flight.  In the interim I built a drop-in board featuring the Featherweight Power Perch for my new Raven2.
     The flight was fast and perfect with easy, proximal recovery.  I could not have shot this better myself!:


Raven2 data - graph, tabular

I only hit 2485' but damn that was a swift ascent!  (Check out the the slope of the velocity curve in the graph link above.)  Warp9 motors have proven unreliable for some but I've never had issues.  I still have a K1499 and K1999 in my motor box so... gotta get those lit!

Sunday, April 29, 2012

Building again!


On the left Megan's kindly rebuilding my Madcow 4" Nike Smoke. Middle is my DarkStar "Heavy Duty" motor tube assembly. Right is the booster tube for my upcoming 2000MPH president's challenge on a CTI M3100. That is, by far, the best carbon fiber layup I've done yet. Megan helped a great deal but I also laid the shrink tape up without seams, used a heat gun to squeeze out the excess resin, and then allowed it cure at room temperature overnight. I still need to post-cure in my oven but this thing's gonna look good!:
 
Here's a full-size detail shot. Use the zoom and pan tools for best results.

Thursday, April 12, 2012

Belated: January '12 Lucerne Launch Report

Catching up... For once I'd planned realistically and took only one complex flight with me on that day. This would be my first five-motor clustered air start in Der Red Mix II.  I fired a CTI 1874K740 C*Star on the ground, then 2-sec delay, then 2 x 282H399 White Thunder, then 2-sec delay, then 2 x 150G50 Imax.  Let's jump into the Flip MinoHD onboard vid and then I'll provide details.  As always, and for maximum thrill, you should watch on YouTube in 720p, full-screen:

From the ground Rob Greenlaw and I could clearly see the flash/pop of the H399 dipped igniters before the motors actually ignited.
   I spent several hours prepping the Raven and Parrot 2 altimeters, e-matches, and recovery system the night before so that made somewhat quick work of the final prep the next morning:

Here I've laid out my casings and associated reloads:

I'd like to take a moment and thank Cesaroni for inventing grain spacers.  It's that sort of competition that really benefits consumers and we appreciate it! Thanks also to Rob for shooting the following pre-flight sequence:



The liftoff on the K740 C*Star was spectacular as always. These motors burn so brightly that it's nearly impossible to capture mach diamonds but I was able to drastically underexpose and post-process to prove their existence:

I was most pleased when the rocket stuck the landing yet didn't crack a fin. I upgraded from a 10' to 12' 'chute this time but that's still almost not large enough for those dangling fins:

Here's the very interesting Raven flight graph. Note the three thrust traces on the acceleration curve and their relative contributions to the velocity spikes (click the image for a larger version):

Here's the tabular data from the Raven if you're interested. And the obligatory recovery shots. Thanks again, Rob!


Next I plan to fly a fully-loaded, all-Skidmark cluster: K675, 1-sec, 2 x I297, 1-sec, 2 x H180, 1-sec, 2 x H123. I'm not sure when but I already bought the motors so... yay. It might even be painted and have decals by then?  I bought a 3M full-face respirator with isocyanate/pesticide absorbent canisters so hopefully my nervous system will remain intact.

Tuesday, April 3, 2012

Belated: Plaster City January 2012 launch report

I've really got to post these entries right after the launch.  Otherwise these protracted delays result.  Ugh.  I decided to keep it simple that day and fly motor ejection only.

I captured two onboard video segments: Super Raven on CTI 867J244 White and DarkStar Lite on CTI 298H159 Green3 propellant:


I was surprised at how punchy that little J was and, as you saw, the Super Raven ejection popped 3-4 seconds too early.  It still attained 3,188' according to the awesome and simple Altimeter One.  Here's liftoff and uneventful recovery:


Second up was my well-worn DarkStar Lite one the Pro29 6G green reload. I like the mach diamonds and vapor eddies.  I also tried to include a photo of the altimeter's LCD screen showing 3,912' but it's hard to see at that angle:


Finally I flew my Madcow Squat on the Pro54 1G 465I150 Imax.  The up part was fun but I still managed to crack a fin fillet on landing. Those are some thick fillets too so... hmmm:


Still to come are my Der Red Mix five motor flight at Lucerne in January and a single sport flight at Plaster City in March.

Saturday, February 18, 2012

Frenzy Massive kit + Pro98 6GXL casing on deck

I still owe two launch reports from January but did not fly in February (I've been traveling). In the interim I wanted to preview what I'm hoping to fly at BALLS 21 this September:

That Frenzy Massive kit is 10.5' tall (3.23m for those down unda) once constructed and you see the Pro98 6GXL casing will barely fit the length of the main tube! (for reference I'm 6'2", 1.88m). I'm considering one of three CTI reloads:
Should be a good time.  Now if I can just arrange a schedule that allows me to travel there...